View HCPL-1931-B600_405964.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Dual Channel Line Receiver Hermetically Sealed Optocoupler Technical Data
HCPL-1930 HCPL-1931 HCPL-193K 5962-89572 Applications
* Military and Space * High Reliability Systems * Isolated Line Receiver * Simplex/Multiplex Data Transmission * Computer-Peripheral Interface * Microprocessor System Interface * Harsh Environmental Environments * Digital Isolation for A/D, D/A Conversion * Current Sensing * Instrument Input/Output Isolation * Ground Loop Elimination * Pulse Transformer Replacement
Features
* Dual Marked with Device Part Number and DSCC Standard Microcircuit Drawing * Manufactured and Tested on a MIL-PRF-38534 Certified Line * QML-38534, Class H and Class K * Hermetically Sealed 16-pin Dual In-Line Package * Performance Guaranteed Over -55C to +125C * High Speed - 10 Mb/s * Accepts a Broad Range of Drive Conditions * Adaptive Line Termination Included * Internal Shield Provides Excellent Common Mode Rejection * External Base Lead Allows "LED Peaking" and LED Current Adjustment * 1500 Vdc Withstand Test Voltage * High Radiation Immunity * HCPL-2602 Function Compatibility * Reliability Data Available
Description
The HCPL-193X devices are dual channel, hermetically sealed, high CMR, line receiver optocouplers. The products are capable of operation and storage over the full military temperature range and can be purchased as either a standard product or with full MIL-PRF-38534 Class Level H or K testing, or from the DSCC Standard Microcircuit Drawing (SMD) 5962-89572. This is a sixteen pin DIP which may be purchased with a variety of lead bend and plating options. See selection guide table for details. Standard Microcircuit Drawing (SMD) parts are available for each lead style.
Truth Table
Functional Diagram
The connection of a 0.1 F bypass capacitor between pins 15 and 10 is recommended.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.
2
All devices are manufactured and tested on a MIL-PRF-38534 certified line and are included in the DSCC Qualified Manufacturers List QML-38534 for Hybrid Microcircuits. Each unit contains two independent channels, consisting of a GaAsP light emitting diode, an input current regulator, and an integrated high gain photon detector. The input regulator serves as a line termination for line receiver applications. It
clamps the line voltage and regulates the LED current so line reflections do not interfere with circuit performance. The regulator allows a typical LED current of 12.5 mA before it starts to shunt excess current. The output of the detector IC is an open collector Schottky clamped transistor. An enable input gates the detector. The internal detector shield provides a guaranteed common mode transient immunity specification of +1000 V/sec.
DC specifications are compatible with TTL logic and are guaranteed from -55C to +125C allowing trouble-free interfacing with digital logic circuits. An input current of 10 mA will sink a six gate fan-out (TTL) at the output with a typical propagation delay from input to output of only 45 nsec.
Selection Guide-Package Styles and Lead Configuration Options
Agilent Part # and Options Commercial MIL-PRF-38534 Class H MIL-PRF-38534 Class K Standard Lead Finish Solder Dipped Butt Joint/Gold Plate Gull Wing/Soldered Crew Cut/Gold Plate Class H SMD Part # Prescript for all below Either Gold or Soldered Gold Plate Solder Dipped Butt Joint/Gold Plate Butt Joint/Soldered Gull Wing/Soldered Crew Cut/Gold Plate Crew Cut/Soldered Class K SMD Part # Prescript for all below Either Gold or Soldered Gold Plate Solder Dipped Butt Joint/Gold Plate Butt Joint/Soldered Gull Wing/Soldered HCPL-1930 HCPL-1931 HCPL-193K Gold Option #200 Option #100 Option #300 Option #600 59628957201EX 8957201EC 8957201EA 8957201YC 8957201YA 8957201XA Available Available 59628957202KEX 8957202KEC 8957202KEA 8957202KYC 8957202KYA 8957202KXA
3
Outline Drawings
16 Pin DIP Through Hole, 2 Channels
20.06 (0.790) 20.83 (0.820) 0.89 (0.035) 1.65 (0.065) 4.45 (0.175) MAX.
8.13 (0.320) MAX.
0.51 (0.020) MIN.
3.81 (0.150) MIN.
0.20 (0.008) 0.33 (0.013)
2.29 (0.090) 2.79 (0.110)
0.51 (0.020) MAX.
7.36 (0.290) 7.87 (0.310)
NOTE: DIMENSIONS IN MILLIMETERS (INCHES).
Device Marking
Agilent DESIGNATOR Agilent P/N DSCC SMD* DSCC SMD* PIN ONE/ ESD IDENT
A QYYWWZ XXXXXX XXXXXXX XXX XXX 50434 * QUALIFIED PARTS ONLY
COMPLIANCE INDICATOR,* DATE CODE, SUFFIX (IF NEEDED) COUNTRY OF MFR. Agilent CAGE CODE*
4
Hermetic Optocoupler Options
Option 100 Description Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is available on commercial and hi-rel product.
4.32 (0.170) MAX. 0.20 (0.008) 0.33 (0.013) 1.14 (0.045) 1.40 (0.055) 2.29 (0.090) 2.79 (0.110) 0.51 (0.020) MAX. 7.36 (0.290) 7.87 (0.310)
0.51 (0.020) MIN.
200
Lead finish is solder dipped rather than gold plated. This option is available on commercial and hi-rel product. DSCC Drawing part numbers contain provisions for lead finish. Surface mountable hermetic optocoupler with leads cut and bent for gull wing assembly. This option is available on commercial and hi-rel product. This option has solder dipped leads.
300
4.57 (0.180) MAX. 0.20 (0.008) 0.33 (0.013) 1.40 (0.055) 1.65 (0.065) 2.29 (0.090) 2.79 (0.110) 0.51 (0.020) MAX. 5 MAX. 9.65 (0.380) 9.91 (0.390)
4.57 (0.180) MAX.
0.51 (0.020) MIN.
600
Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is available on commercial and hi-rel product. Contact factory for the availability of this option on DSCC part types.
3.81 (0.150) MIN. 0.20 (0.008) 0.33 (0.013) 2.29 (0.090) 2.79 (0.110) 1.14 (0.045) 1.25 (0.049) 7.36 (0.290) 7.87 (0.310)
0.51 (0.020) MIN.
Note: Dimensions in millimeters (inches).
5
Absolute Maximum Ratings
Storage Temperature ................................................. -65C to +150C Operating Temperature ............................................... -55C to +125C Lead Solder Temperature ................................................ 260C for 10 s 1.6 mm below seating plane Forward Input Current - II (each channel) ................................. 60 mA2 Reverse Input Current ................................................................. 60 mA Supply Voltage - VCC ....................................... 7 V (1 Minute Maximum) Enable Input Voltage - VE (each channel) ...................................... 5.5 V Not to exceed VCC by more than 500 mV Output Collector Current - IO (each channel) ............................. 25 mA Output Collector Power Dissipation (each channel) ................... 40 mW Output Collector Voltage - VO (each channel) ................................... 7 V Total Package Power Dissipation .............................................. 564 mW Input Power Dissipation (each channel) ................................... 168 mW
Schematic
A 0.1 F BYPASS CAPACITOR MUST BE CONNECTED BETWEEN PINS 10 AND 15 (SEE NOTE 1).
ESD Classification
(MIL-STD-883, Method 3015) .............................................. (), Class 1
Recommended Operating Conditions
Parameter Input Current, Low Level Input Current, High Level* Supply Voltage, Output High Level Enable Voltage Low Level Enable Voltage Fan Out (@ RL = 4 k) Operating Temperature Symbol IIL IIH VCC VEH VEL N TA -55 Min. 0 12.5 4.5 2.0 0 Max. 250 60 5.5 VCC 0.8 5 125 Units A mA V V V TTL Loads C
*12.5 mA condition permits at least 20% guardband for optical coupling variation. Initial switching threshold is 10 mA or less.
6
Electrical Specifications TA = -55C to 125C unless otherwise stated. See note 15.
Parameter
High Level Output Current Low Level Output Voltage
Symbol
IOH VOL
Test Conditions
VCC = 5.5 V, VO = 5.5 V II = 250 A, VE = 2.0 V VCC = 5.5 V; II = 10 mA VE = 2.0 V, IOL (Sinking) = 10 mA II = 10 mA
Group A Limits Subgroups Min. Typ.* Max. Units Fig. Note
1, 2, 3 20 250 A 3 3
1, 2, 3
0.3 2.2
0.6 2.6
V
1
3
Input Voltage Input Reverse Voltage Low Level Enable Current High Level Enable Voltage Low Level Enable Voltage High Level Supply Current Low Level Supply Current Input-Output Insulation Leakage Current Propagation Delay Time to High Output Level Propagation Delay Time to Low Output Level Common Mode Transient Immunity at High Output Level Common Mode Transient Immunity at Low Output Level
VI II = 60 mA VR I EL VEH VEL ICCH ICCL VCC = 5.5 V; II = 0, VE = 0.5 V both channels VCC = 5.5 V; II = 60 mA, VE = 0.5 V both channels Relative Humidity = 45% t = 5 s, VI-O = 1500 Vdc RL = 510 ; CL = 50 pF, II = 13 mA,VCC = 5.0 V RL = 510 ; CL = 50 pF, II = 13 mA, VCC = 5.0 V VCM = 50 V (peak), VO (min.) = 2 V, RL = 510 ; II = 0 mA, VCC = 5.0 V VCM = 50 V (peak), VO (max.) = 0.8 V, RL = 510 ; II = 10 mA, VCC = 5.0 V IR = 10 mA VCC = 5.5 V, VE = 0.5 V
1, 2, 3 2.35 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 21 27 2.0 0.8 28 36 0.8 -1.45 2.75 1.10 -2.0
V V mA V V mA mA
2
3 3 3 3, 12 3
II-O
1 9 55
1 100
A
4
t PLH
ns 10, 11 9 60 140 100 ns 10, 11 9, 10, 11 1000 10,000 120 V/s
4, 5
3, 5
t PHL
4, 5
3, 6
|CMH|
8, 9
3, 9, 14
|CML|
9, 10, 11
1000
10,000
V/s
8, 9
3, 10, 14
*All typical values are at VCC = 5 V, TA = 25C.
7
Typical Specifications
TA = 25C, VCC = 5 V Parameter
Resistance (Input-Output) Capacitance (Input-Output) Input-Input Insulation Leakage Current Resistance (Input-Input) Capacitance (Input-Input) Propagation Delay Time of Enable from VEH to VEL Propagation Delay Time of Enable from VEL to VEH Output Rise Time (10-90%) Output Fall Time (90-10%) Input Capacitance
Symbol
R I-O CI-O II-I R I-I CI-I tELH
Typ.
10
12
Units
pF nA pF ns
Test Conditions
VI-O = 500 V dc f = 1 MHz 45% Relative Humidity, VI-I = 500 Vdc, t = 5 s VI-I = 500 Vdc f = 1 MHz
Fig.
Note
3, 13 3, 13 11 11 11
1.7 0.5 1012 0.55 35
6, 7 RL = 510 , CL = 15 pF, II = 13 mA, V EH = 3 V, V EL = 0 V
3, 7
tEHL tr tf CI
35
ns
6, 7
3, 8
30 24 60
ns ns pF
RL = 510 , CL = 15 pF, II = 13 mA f = 1 MHz, VI = 0, PINS 1 to 2 or 5 to 6
3 3 3
Notes: 1. Bypassing of the power supply line is required, with a 0.1 F ceramic disc capacitor adjacent to each isolator. The power supply bus for the isolators should be separate from the bus for any active loads, otherwise additional bypass capacitance may be needed to suppress regenerative feedback via the power supply. 2. Derate linearly at 1.2 mA/C above TA = 100C. 3. Each channel. 4. Device considered a two terminal device: pins 1 through 8 are shorted together, and pins 9 through 16 are shorted together. 5. The tPLH propagation delay is measured form the 6.5 mA point on the trailing edge of the input pulse to the 1.5 V point on the trailing edge of the output pulse. 6. The tPHL propagation delay is measured from the 6.5 mA point on the leading edge of the input pulse to the 1.5 V point on the leading edge of the output pulse. 7. The tELH enable propagation delay is measured from the 1.5 V point on the trailing edge of the enable input pulse to the 1.5 V point on the trailing edge of the output pulse. 8. The tEHL enable propagation delay is measured from the 1.5 V point on the leading edge of the enable input pulse to the 1.5 V point on the leading edge of the output pulse. 9. CMH is the maximum tolerable rate of rise of the common mode voltage to assure that the output will remain in a high logic state, i.e. VOUT > 2.0 V. 10. CML is the maximum tolerable rate of fall of the common mode voltage to assure that the output will remain in a low logic state, i.e. VOUT < 0.8 V. 11. Measured between adjacent input leads shorted together, i.e. between 1, 2 and 4 shorted together and pins 5, 6 and 8 shorted together. 12. No external pull up is required for a high logic state on the enable input. 13. Measured between pins 1 and 2 or 5 and 6 shorted together, and pins 10 through 15 shorted together. 14. Parameters shall be tested as part of device initial characterization and after process changes. Parameters shall be guaranteed to the limits specified for all lots not specifically tested. 15. Standard parts receive 100% testing at 25C (Subgroups 1 and 9). Hi-Rel and SMD parts receive 100% testing at 25, 125, and -55C (Subgroups 1 and 9, 2 and 10, 3 and 11, respectively).
8
Figure 1. Input-Output Characteristics.
Figure 2. Input Characteristics.
Figure 3. High Level Output Current vs. Temperature.
Figure 4. Propagation Delay vs. Temperature.
Figure 5. Test Circuit for tPHL and tPLH.
Figure 6. Enable Propagation Delay vs. Temperature.
Figure 7. Test Circuit for tEHL and t ELH.
9
Figure 8. Typical Common Mode Transient Immunity.
1 A B IIN 2 3 4 5 6 7 VIN 8 VCM + - VCC
16 15 14 13 12 11 GND 10 9
5V
510 OUTPUT VO MONITORING 0.01 F NODE BYPASS
PULSE GEN.
Figure 9. Test Circuit for Common Mode Transient Immunity and Typical Waveforms.
VCC +5.5 V
VOUT +2.6 V
100 1 2 3 4 100 5 6 - VIN +5.0 V + 7 8 12 200 11 0.01 F 10 9 16 15 14 200 13
TA = +125 C
CONDITIONS: II = 30 mA IO = 10 mA VCC = 5.5 V
Figure 10. Burn In Circuit.
10
Application Circuits*
HCPL-193X
Figure A1. Polarity Non-Reversing.
HCPL-193X
Figure A2. Polarity Reversing, Split Phase.
11
Figure A3. Flop-Flop Configurations.
MIL-PRF-38534 Class H, Class K, and DSCC SMD Test Program
Agilent Technologies' Hi-Rel Optocouplers are in compliance with MIL-PRF-38534 Class H and K. Class H and Class K devices are also in compliance with DSCC drawing 5962-89572. Testing consists of 100% screening and quality conformance inspection to MIL-PRF-38534.
www.semiconductor.agilent.com Data subject to change. Copyright (c) 2000 Agilent Technologies Obsoletes 5967-5809E 5968-9401E (4/00)

▲Up To Search▲

Price & Availability of HCPL-1931-B600

	To Download HCPL-1931-B600 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .